Jilin Province Dahua Machine Manufacture Co.,Ltd. Corporation Strypped-down Design

With the policy"to support the regulation and reform of the old industrial base in north-eastern area,"proposed on the 16th Party Congress, Ji Lin province, confronted with overlarge proportion of state-owned economy of low operational level and low profit, must strengthen the initiation in the system and mechanism of the state-owned enterprises, and remove the systematic obstacles in the way of economy development. This is the primary way to enhance the inner dynamism in the regulation of Ji Lin old industrial base. Jilin Dahua Machine Manufacturing Ltd. Company is a typical state-owned exclusive investment company. It is one of the 50 main restructuring enterprises established by 2005 Jilin state-owned enterprises restructure policy. Based on the investigation and summarizing of the policies, theories and basic mode about the restructure of stated-owned enterprises and the basic policies of Jilin state-owned enterprise restructure, the present paper designs a restructure project suited to Jilin Dahua Machine Manufacturing Ltd. Company. This project is in accordance with the basic principle of"Three Advantages", and has achieved the goal of"Four in Place, One Basis". The restructure project design of Dahua Company mainly involves such areas as state policy, restructure mode, company introduction, general project design, details design, inspiration and thoughts. All in all, there are four aspects:First, the choice of basic reform mode is the core and key to the design of reform project. It is mainly because the suitability of reform mode plays a key role to the long-term development of the company.There are mainly three types of basic restructure modes, i.e., the mode of interior purchase and of exterior purchase, the mode of market operation and of non-market operation, and the mode of whole and partial restructure. These three modes can be employed separately or together. This paper mainly discusses the basic concept, analysis of advantages and disadvantages, and cases of application...