Design Of The System Of Sending Interferential Source Of Airborne Photoelectric Counterwork

In the modern war, the key of the victory is that one should know how to get the information and how to identify and dispose the correlative information, so that one can judge the position of ours and enemy's. Then to implement the interference or the defending function. "The System of Stable Flat Roof of Airborne Photoelectric counterwork" can meet the demand. It' s composed with the systems of optics, machine and electricity. It can capture, focus and automatic follow the target quickly. This target is flying in the sky or moving on the ground. And this system can interfere the target.This paper is about the design of "The System of Sending Interferential Source ", which has the interferential function. It's one of the parts of "The System of Stable Flat Roof of Airborne Photoelectric counterwork". In this paper ,it introduce the design of the optical system with ZEMAX, which is the software of optical design. And this paper also shows the structure and parameters of the optical system. The Xenon light of super high voltage is used as interferential source. The position of it is on the focus of the reflector of ellipsoid surface. After reflecting, its lights form a collective point . This point and objective focus of collimation lens are superposition. Though the collimation lens, the beam of light become parallel lights. Then though the Coude Reflector and radiation system of special prism, the lights become a beam of light with 3 ° emanative angle. In addition, this paper shows the design of the driving circuit of the interferential source and the design of the circuit's monitor based on LabVIEW.