The Design Of Remote Intelligent Communication Terminal Based On GPRS

With the development and application of embedded system technology and information technology, data transmission that depend on wireless communication network effectively change the remote data transmission of geographical constrain based on the platform of embedded systems. GPRS is a new type of packet data transmission technology that has opened in the existing GSM,and is becoming an important means of monitoring data。The paper makes the research and designs the remote intelligent communication terminal based on GPRS in this situation.In this paper, the design of remote intelligent communication terminal system is completed based on the analysis of requirement and function, and system indicators is confirmed. The design takes the S3C2410A microprocessor and GPRS module MC-55 as a center, complete the embedded hardware and the corresponding peripheral circuits. Considering the anti-interference ability of the circuit, software architecture communication terminail driver and remote communicate software are designed by embedded linux operating system and MiniGUI, and thus the feature of value interface is implemented. Anti-jamming technology is used in software design. The simulation results of the remote intelligent terminal indicates that hardware and software work normally and stably, system performance fulfils the needs, so the function of the remote intelligent communication is implemented and the pratical value is endowed with.