The Design And Study Of A Feller-processor Head

With the advancement of technology, feller machine has been used all over the world. Practice shows that the efficiency of feller machine has been far greater than manual labor in the cutting area. The paper researches the trees' specific situation in China's plantation area, analyze the inadequate of the existing joint operating machine, then put forward a new logging machine applied in plantation cutting area, which will combined virtual technology theory with the traditional experience, 3D design engineering Pro/Engineer has been used to assemble the feller processor head machine in virtual logging, display the image process of concrete operation, interfering check, and revise the design which is unreasonable.The subject has been focus on applied research, In view of the situation in plantation, key research applied to the deficiencies of the existing machine of feller processor head in plantation, and try to design a new machinery. Following are main research areas:1 Described the development and trends of Mechanisms, and issues raised based on the specific technical means;2 Analyze the deficiencies of the existing machine of feller processor head in plantation, Research the movement principle and mechanism of the machine available, combining machinery design theory, and design a new feller processor head machine suited for our plantation;3 Use the Pro/Engineer to establish a 3D entity model of the parts of the feller processor head machine, analyze the relative movement between the parts, develop the assembly sequence rationally, finally form a new model, which can provide an example for the future research.