| Fabry-Perot interferometer (FPI) devices are designed based on the electro-optic (EO) activities of nonlinear optical (NLO) polymer materials for tunable optical filters (TOFs) and spatial light modulators (SLMs). The performance of the EO polymer based FPI devices is theoretically modeled with first order approximation on the FPI cavity interface phase dispersion. NLO materials including TCBD coupled hybrid sol-gel, AJL8/amorphous polycarbonate (APC), and AJLS102/APC are incorporated in FPI structures with distributed Bragg reflector mirrors and transparent conducting oxide electrodes for TOFs. High finesse (over 200), low drive voltage (10 dB isolation ratio with 5 V), and fast settling time (about sub-millisecond) are achieved. The physical origin of the large tunabilities is explored and the contributions from EO effect and inverse piezoelectric effect are analyzed. EO polymer SWOHF3ME/APC is employed in FPI devices with simplified structures for SLMs. Modulation beyond megahertz level is achieved with constant modulation ratio from DC frequency to high operation speed. The operation speed can be potentially over gigahertz with improved device and drive circuit design. When the EO polymer based SLM is configured to work at near the resonance band of the NLO material, the spectral tunability is increased due to resonance enhanced EO activity and the SLM performance is significantly improved. The EO polymer based FPI devices can be further optimized and are promising candidates for many optoelectronic applications. |
