| Based on the driven power of science and technology nowadays,recording technology is becoming more and more popular,a lot of introduced hardware and software,digitization,miniaturization,intelligent recording had entered more ordinary people’s life.In the past 10 years,with the substantial improvement of the domestic economic level,all kinds of variety shows,music talent shows,concerts,social performances of all kinds are popular.This also causes people to pay more attention to the record technology.The sound requirements are also increasingly high.During the period of studying for the Master of Recording Arts,the author took part in various kinds of on-campus and off-campus recording,audio processing and other related work,combined with his own interests and professional direction,chose "simultaneous recording and post-mixing of live band" as the topic,and took "simultaneous recording of live acoustic bands" as an example to conduct research and analysis.This paper is mainly divided into four chapters,respectively: the use of microphone,the basic concept of electroacoustic band live synchronous recording,case analysis and research,post-mixing processing.This article has made a certain introduction to the use of various kinds of microphone,to understand its specific types,characteristics,uses,and the concept of stereo sound recording microphone.Then,this paper introduces the application scenario of "simultaneous recording of electroacoustic band",including the characteristics and difficulties of simultaneous recording of electroacoustic band and live,and puts forward the personal viewpoint and understanding of the application significance of this technology.Then through personal participation in two different recording practice case,the author chooses one of the cases as the main object to research and analysis,from the perspectives of design of the recording,putting design of microphone,and building project to record and adjust.The building the recording work of the system is discussed,and another case is discussed as a supplement to make a more objective analysis.The last part is the post-mixing processing,it is divided into: recording material arrangement and selection,volume balance,dynamic processing,balance processing and space processing.As the core research object of this paper is the early recording work,the chapter of the post-mixing is mainly a frame narrative,with only part of the analysis of examples,and no detailed research and discussion.The author hopes that through the practical experience,this thesis can owns a more in-depth discussion,analysis,evaluation and summary.By summing up experience,more suggestions can be contributed to the work of Simultaneous Recording and Post-Mixing of Live Band,especially for the small and medium size of recording work)... |
