Theory and application of SBS-based group velocity manipulation in optical fiber

All-optical devices have attracted many research interests due to their ultimately low heat dissipation compared to conventional devices based on electric-optical conversion. With recent advances in nonlinear optics, it is now possible to design the optical properties of a medium via all-optical nonlinear effects in a table-top device or even on a chip.;In this thesis, I realize all-optical control of the optical group velocity using the nonlinear process of stimulated Brillouin scattering (SBS) in optical fibers. The SBS-based techniques generally require very low pump power and offer a wide transparent window and a large tunable range. Moreover, my invention of the arbitrary SBS resonance tailoring technique enables engineering of the optical properties to optimize desired function performance, which has made the SBS techniques particularly widely adapted for various applications.;I demonstrate theoretically and experimentally how the all-optical control of group velocity is achieved using SBS in optical fibers. Particularly, I demonstrate that the frequency dependence of the wavevector experienced by the signal beam can be tailored using multi-line and broadband pump beams in the SBS process. Based on the theoretical framework, I engineer the spectral profile to achieve two different application goals: a uniform low group velocity (slow light) within a broadband spectrum, and a group velocity with a linear dependence on the frequency detuning (group velocity dispersion or GVD).;In the broadband SBS slow light experiment, I develop a novel noise current modulation method that arbitrarily tailors the spectrum of a diode laser. Applying this method, I obtain a 5-GHz broadband SBS gain with optimized flat-topped profile, in comparison to the ~40 MHz natural linewidth of the SBS resonance. Based on the broadband SBS resonance, I build a 5-GHz optical buffer and use this optical buffer to delay a return-to-zero data sequence of rate 2.5 GHz (pulse width 200 ps). The fast noise modulation method significantly stabilizes the SBS gain and improves the signal fidelity. I obtain a tunable delay up to one pulse-width with a peak signal-to-noise ratio of 7. I also find that SBS slow light performance can be improved by avoiding competing nonlinear effects. A gain-bandwidth product of 344 dB.GHz is obtained in our system with a highly-nonlinear optical fiber.;Besides the slow light applications, I realize that group velocity dispersion is also optically controlled via the SBS process. In the very recent GVD experiment, I use a dual-line SBS resonance and obtain a tunable GVD parameter of 7.5 ns2/m, which is 10;9;Finally, I extend the basic theory of backwards SBS to describe the forward SBS observed in a highly nonlinear fiber, where asymmetric forward SBS resonances are observed at the gigahertz range. An especially large gain coefficient of 34.7 W-1 is observed at the resonance frequency of 933.8 MHz. This is due to good overlap between the optical wave and the high order guided radial acoustic wave. The interplay from the competing process known as the Kerr effect is also accounted for in the theory.