Framework for manufacturing rigid optically accessible internal flow passage models using water-soluble rapid prototyped molds

Posted on:2006-12-09

Degree:M.S

Type:Thesis

University:The University of Texas at El Paso

Candidate:Kenjale, Bhupendra V

Full Text:PDF

GTID:2452390008467373

Subject:Engineering

Abstract/Summary:

Framework for manufacturing rigid optically accessible internal flow passage models using water-soluble rapid prototyped molds is developed in this thesis. Technique of measuring the refractive index of solid polyurethane castings is developed.

Keywords/Search Tags:

Flow passage models using water-soluble, Internal flow passage models using, Accessible internal flow passage models, Optically accessible internal flow passage, Rigid optically accessible internal flow, Manufacturing rigid optically accessible internal

Related items

1	Numerical Simulation And Experimental Study On Performance Matching Of Outlet Passage Of Axial Flow Pumping System
2	Analysis Of Internal Flow And Pulsation Characteristics Of Bidirectional Vertical Pump Device In Shangwuweigang Pumping Station
3	Diagnosis Research On The Energy Saving Potential Of Flow Passage In Extraction Steam Turbine
4	Investigation Of Flow Resistance And Heat Transfer In The Internal Cooling Passage With Ribs And Film Holes
5	The Internal Flow And Performance Prediction Of Vertical Submersible Pump System
6	Design Of Electronic Control System For Optically Accessible CAI Engine
7	Heat transfer and flow structure from dimples in an internal cooling passage
8	Numerical Analysis On Flow Characteristics In Full Flow Passage Of Francis Turbine
9	Analysis Of Flow Passage Parts And Internal Flow Characteristics On Large Axial Induced Draft Fan
10	Development of a high-temperature, high-pressure, optically accessible flow vessel and subsequent study of n-heptane using high-speed visualization techniques