| Multimode interference (MMI) in optical fibers has been studied and its applications in optical fiber lasers and amplifiers have been proposed and demonstrated in this thesis.;When a single-mode fiber is spliced onto a multimode fiber, quasi-reproduction of the field from the single-mode fiber, also called "self-imaging", occurs periodically along the multimode fiber where the phase differences between the strongly excited modes are very small. The properties of self-imaging in multimode optical fibers have been investigated experimentally and theoretically in this thesis. Key parameters for the design of MMI-based fiber devices have been defined and their corresponding values have been provides for the 50 mum and 105 mum multimode fibers.;By use of the self-imaging effect, a fiber laser with single-transverse-mode output while using a multimode rare-earth-doped fiber has been demonstrated as an alternative route to overcome the constraints of an active single-mode fiber. The first MMI-based fiber laser in the world has provided a perfect beam quality (M2 = 1.01) and an inherent narrow spectrum (Deltalambda 3dB < 0.5 nm). Linearly-polarized narrow-linewidth single-transverse-mode emission has also been obtained from a MMI fiber laser utilizing a single-mode fiber inscribed with a polarization-maintaining fiber Bragg grating. Moreover, high power MMI fiber lasers and amplifiers utilizing rare-earth doped silica large-core multimode fibers have been proposed and their critical features, such as efficiency, optical spectrum, and beam quality, have been investigated.;On the other hand, because exclusively excited LP0, n modes inside the multimode fiber segment are represented by apertured Bessel fields that have long propagation invariant distances, nondiffracting beams can be generated from the MMI-based fiber devices. In this thesis, the principle of generating nondiffracting beams from multimode optical fibers has been described and the propagation characteristics of the generated beams have been investigated. Active MMI fiber devices to generate tens of watts or even hundreds of watts nondiffracting beams have also been proposed. |
