Communication protocols for wireless cognitive radio ad-hoc networks

Cognitive radio (CR) technology allows devices to share the wireless spectrum with other users that have a license for operation in these spectrum bands. This area of research promises to solve the problem of spectrum scarcity in the unlicensed bands, and improve the inefficient spectrum utilization in the bands reserved for the licensed users. However, the opportunistic use of the available spectrum by the CR users must not affect the licensed users. This raises several concerns regarding spectrum sensing, sharing and reliable end-to-end communication in CR networks.;This thesis is concerned with the design and implementation of communication protocols for the multi-hop infrastructure-less CR ad-hoc networks (CRAHNs). In addition, it also addresses the critical issue of interference-free spectrum usage in specific ad-hoc architectures, such as, resource-constrained wireless sensor networks and wireless mesh networks that have high traffic volumes.;The problems of spectrum management that are unique to CR networks are first identified in this thesis. These issues are then addressed at each layer of the network protocol stack while considering the distributed operation in CRAHNs. At the physical layer an algorithmic suite is proposed that allows the CR devices to detect and adapt to the presence of wireless LANs and commercial microwave ovens. A common control channel is designed that allows sharing of the spectrum information between the CR users, even when the available spectrum varies dynamically. A spectrum sharing scheme for mesh networks is proposed at the link layer that allows cooperative detection of the licensed users and fair utilization of the available spectrum among the mesh devices. The spectrum availability and route formation are then considered jointly at the network layer, so that the licensed users are protected as well as the CRAHN performance is maximized. Finally, we extend the classical TCP at the transport layer to ensure end-to-end reliability in a multi-hop CR environment.