Synthesis of tungsten trioxide thin films for gas detection

The ability to detect and quantify presence and concentration of unknown gasses is sought for applications ranging from environmental monitoring to medical analysis. Metal oxide based chemical sensing technology currently exists but the ability to provide a compositional gas breakdown reliably within a short time frame is not readily available. A very small sensor that can differentially identify the type and concentration of a gas is required. Novel methods of creating low cost and easily tuned one and two-dimensional gas sensing elements are explored. Tungsten trioxide has been thoroughly documented as an electrochromic coating, but highly sensitive WO 3 elements with beam and nanowire structures have yet to be explored. Research of WO3 as a gas sensor encompasses three major components: A suitable sensing chamber with accurate analyte gas flow control and temperature control, a reliable method for WO 3 deposition, and a high yield fabrication process. This thesis explores all three of these technologies. Chapter two starts with a summary of existing tungsten trioxide fabrication methods. An overview of WO 3 processing follows. A comprehensive setup was designed and created to test the gas sensing response of a series of metal oxide based resistive elements through conductimetric analysis. Chapter three provides an in depth account of gas sensor test chamber design and testing. Critical test chamber aspects such as temperature control, precise gas flow control, highly efficient analyte gas switching and ease of use are presented. Chapter four outlines WO3 electrodeposition and the fabrication of beam structures for testing, while chapter five explores the templated electrodeposition of WO3 segments intercalated between gold nanowire segments. Finally, chapter six provides a summary of the research presented in this thesis as well as future directions and options available for further exploration of WO3 gas sensing elements.