Research And Development Of The Machine For Stripping Coconut Clothes By Opening Umbrella

Most coconut trees of our country grow in Hainan.All kinds of coconut food processing industry are located in Hainan,and Hainan is the province of largest coconut consumption.Most enterprises only adopt mechanical handing in subsequent coconut processing,but the pre process is manual operation by workers,such as peeling of coconut,opening of the coconut shell and so on.Peeling of coconut by hands of worker is inefficient,easy to damage workers and often injuries workers' hands.And manual operation may not meet the requirements of food hygiene.So it is very necessary to improve the mechanical level of coconut processing.The project of the machine for stripping coconut clothes by opening umbrella mainly solves the problem of stripping nature coconut clothes by mechanization.This machine for stripping nature coconut clothes by opening umbrella is in the light of the physical characteristics of nature coconut and the problem of low working efficiency,high damage rate of coconut husk,low degree of automation of the machine for stripping coconut clothes at present,The main data is measured by the simulation experimentation of machine for stripping coconut clothes by opening umbrella.Then the whole of machine for stripping coconut clothes by opening umbrella is designed to realize the requirement of automatic stripping clothes.Lifting device for controlling nut rise and fall by rotation of lifting screw and by rotation of stripping screw,umbrella type open and close of stripping tool carrier pretending stripping tool for controlling nut rise and fall are based on lifting and stripping device of the machine for stripping coconut clothes by opening umbrella.The mechanical model of lifting and stripping device is established for analysis of force and important parameter of lifting and stripping device.Meshed the stripping tool and the stripping nut of the machine for stripping coconut clothes by opening umbrella by SolidWorks.Conducting the finite element model of machine for stripping coconut clothes by opening umbrella by using SolidWorks is used to check whether the key components meets design requirements.The test of machine for stripping coconut clothes by opening umbrella fully proves the design of machine for stripping coconut clothes by opening umbrella meets the design requirements.