The Design Of Bamboo Automatic Cutting And Sorting Continuous Equipment

This paper is aimed at the problems of low automation,low production precision and high labor cost in the current bamboo cutting length cutting and bamboo wall thickness sorting process,relying on the national key research and development plan "Research on the key technology of continuous processing of bamboo composite material unit materials"(plan number:2017YFD060080103),the research was carried out around the cutting of the bamboo and the thickness separation of the bamboo wall.Under the principle of economy and practicality,a design scheme for automatic cutting and sorting continuous equipment of bamboo is proposed.Under the principle of economy and practicality,a design scheme of automatic cutting and sorting continuous equipment for raw bamboo is proposed,which can improve production efficiency and production precision,reduce labor cost and labor intensity.In order to realize the fixed length cutoff of the bamboo and sorting of bamboo wall thickness automation provides technical ideas.The content of the paper is as follows:(1)The development history of bamboo machinery at home and abroad,the status quo of domestic bamboo processing machinery were reviewed.The improvement direction of the bamboo cutting equipment and the bamboo wall thickness sorting equipment was proposed.(2)Through the detailed analysis of the process of cutting off the bamboo and sorting of bamboo wall thickness,the design goal of the automatic cutting and sorting continuous equipment of the bamboo is proposed.The advantages and disadvantages of the common control system in the industry are compared and based on The work requires the selection of PLC as the controller,determining the overall design of the bamboo automatic cutting and sorting continuous equipment.(3)According to the steps of the bamboo fixed length cutting and bamboo wall thickness sorting,the Sol id Works software is used to design the mechanical mechanism of the equipment.Select key components based on the equipment’s working environment and work requirements.(4)Designed the control system of the bamboo automatic cutting and sorting continuous equipment.The Siemens S7-200 CPU226 was selected as the controller,and the I/O interface was allocated according to the working requirements.STEP7-MicroWin was used according to the program block diagram of the system,complete the programming of the entire control system.In summary,the paper focuses on the working characteristics of the bamboo fixed length cutting and bamboo wall thickness separation.designs mechanical mechanism for self-cutting and sorting continuous equipment of original bamboo,and through the PLC control system to achieve the bamboo fixed length cut off and bamboo wall thickness sorting automation.The main results are to reduce the production cost of the bamboo fixed length cutting and bamboo wall thickness sorting,and improve its production precision and work efficiency.