Design And Implementation Of Optical Fiber Distribution System Based On SOAP Interface Protocol

High-speed mobile data services are inseparable from the good quality of signal coverage,the optical fiber distribution system is developed from the traditional direct repeater,is a solution using broadband digital technology and optical fiber to carry wireless signal transmission and distribution to achieve current 2G,3G,4G network coverage.In recent years,the development of 4G is getting more and more mature.The original fiber optic distribution system customized by a single operator has a great waste of resources due to the severe resource reuse problem among different operators,there was a great waste of resources.Based on the analysis of the limitation of the monitoring center management in the traditional optical fiber distribution system and the complicated requirements of the three mobile operators and the compatibility of the 5th-Generation mobile communication system(5G)in the future,a design of optical fiber distribution system based on SOAP interface protocol is proposed.The innovative point of this lesson can be summarized as follows:1.Different from the traditional equipment,the optical fiber distribution system based on SOAP protocol is independent of the operator and achieves the convergence of multi-operator multi-protocol,which can greatly reduce the waste of resources and realize the resource sharing among operators.2.For the traditional equipment must be installed various types of server software,it is cumbersome to use and waste resources.Devices based on the SOAP interface protocol are accessed directly through the Web,no intermediate server required,it is easier to use and saves resources.3.SOAP interface protocol is a simple object access protocol based on XML protocol,which has the characteristics of strong expansibility,transparency and simplicity.Compared with the traditional protocol,protocol stack designed by SOAP is more flexible,scalable,easy to maintain,can effectively cope with the complex needs of multi-system multi-operator.This topic mainly describes the design of optical fiber distribution system based on SOAP protocol from three aspects.Firstly,the protocol of network management B based on SOAP protocol is expounded.Secondly,the middle layer software architecture of optical distribution system is designed to process and deliver The configuration information of the upper layer network management to the protocol of the lower layer hardware;Finally,elaborated the design of the system bottom layer communication link.