Sculptured Kerf Dual Structure Design And Research

Sculptured kerf is a dual-purpose machine used for the cement concrete pavement roadconstruction and maintenance work of professional equipment, is sculptured with slitmultifunctional road work equipment.As China’s cement concrete pavement mileageincreases, the Sculptured kerf dual purpose machine will have a higher social and broadapplication prospects.This article mainly around the Sculptured kerf dual-use machinedeveloped with the intention of developing a Sculptured both versatile and can kerfautomatically Sculptured walking slit-dryer.This thesis summarizes the development of dual-use machine profile and researchstatus.Sculptured kerf on the overall design of a dual-purpose machines are arranged so itsstructure one by one research design.First conducted a dual-purpose machine sculptured kerfdevice design calculations, sculptured kerf device is a dual-purpose machine working device,and the sculptured blade kerf saw blades on the same axis, mounted in front of the fuselagepart of its work by the same motor drive to achieve a dual-purpose machine functions. Then asculptured dual automatic kerf device is designed to walk, walking devices automaticallypower machine by the inverter motor and reducer composition, so that to achieve multi-speeddual-purpose machine, low ability to walk, its power through the gear output shaft the clutchmechanism and the transmission mechanism and walking axle connection, whichautomatically go walking and embarked on the functions.Followed by the cutting depthadjustment device research, cutting deep into the screw nut to the main use-linkage structure,through the principle of automatic control of the whole lift lever to control the movements ofthe cutter engraved.Device is designed to complete the above three, and then in the spaceabove the body plate production tanks, pipes, hood, guide wheel.Finally, we use the finiteelement software ANSYS Sculptured walking slit device and automatic axis mechanicalanalysis, according to the results of the analysis to validate the design is reasonable andcorrect.