Technical Analysis Of Reinforced Concrete Structure And Its Application In Engineering

In the field of construction, building engineering structure is very wide and very fast development of the structural system in the twentieth century.Because of man-made destruction, natural disasters and aging a variety of reasons, however, in its use, will give the building bring a lot of security risks. Especially for those just construction project, construction, exploration and design management and technology-related issues, resulting in the early stages of the construction project or construction process there will be all sorts of quality problem, so it should be in a timely manner using the appropriate measures, otherwise it will cause a lot of security incidents. Therefore, the purpose of this article as well as technical staff encountered issue is how to use a very useful measures to implement the appropriate governance of those buildings have been destroyed, so as to make it function to reply.First, this article in accordance with the project reinforced features, tells the story of why reinforcement and its meaning, while analysis of the concrete pillars, boards and beams and so on some parts of the reinforcement and conditions, according to the comparison, a summary of the scope and characteristics of the reinforcing way. frequently used, such as bonding steel, prestressed. increased cross-section, the creation the fulcrum and outsourcing steel reinforcement.Second. The article described a number of different reinforcement means carrying capacity is calculated and the method, transformation and strengthening buildings to provide a reference basis.Third, to reinforce the structure is the second force member, decided it works when the characteristics of the components, steel and concrete part of it plus some lag compared with the beginning of steel and concrete, this feature is very likely to cause the edge of the pressure receiving region for crushing concrete member cracks and deflection of the beam and pouring the entire compared, but under tension reinforced with integral Girder compared, in a very small bending moment under the corresponding current limit. Structural parts is not successful reinforcement. the key part is to ensure that the old and new part of the concrete workCan proceed smoothly. Fourth, The article combined the example of the operation of the reinforcing member by themselves, about the need to pay special attention to the problem of reinforcement construction and design.At the same time, put forward how to choose the way of strengthening and different reinforcement methods of construction technology from both the safety and economic security issues on a variety of quality,and introduced all kinds of strengthening methods of construction quality and construction procedures, which must be introduced to the reinforced concrete from the Corresponding reference.