The Study Of The Abrasive Flow Polishing Fixtures

Abrasive Flow Machining is a new processing methods. It polishes the workpiece that the traditional processing methods are difficult to process and that of machining accuracy is not high by rounding and other processing. The effect was particularly notable.This article is the mechanism of abrasive flow from the start and in-depth understanding of the principles of Abrasive Flow Machining. Binding machine work pressure, flow rate, temperature and other parameters to determine the overall structure of the working stroke and abrasive flow machine. Study of the machine by calculating the various parameters to determine the overall shape of the clamp size range. Processing required are not the same type of surface, the abrasive flow passage way formed with a specific folder are different. Depending on the type of fixture design as opposed to using a specific folder. And dangerous section be checked to ensure that the strength of the machine. Finally, ANSYS workbench for abrasive flow device key components for static analysis and stress-strain analysis, modal analysis of the entire machine to ensure the reasonableness of abrasive flow device design. After the completion of the overall design, drawing two-dimensional map, further determines the size of each member, the machine can ensure reasonable fit, and then draw a three-dimensional view of the assembled machine and. Through access to many documents and manuals, and machine tool simulation work process, ensure the stability of machining.