Shot Point Tracking Monitoring Methods And Software Designing

Currently seismic exploration put forward the more and more intense requirements for large collection and number of high-performance digital detection unit and complicated arrangement clearly. In practical seismic exploration construction, it is difficult for constructer to monitor the physical point (shot point receive point) of construction region due to the imperfection of early soft and hardware equipment function. So that constructor can not fully grasp actual parameters of the physical point of the work area that usually cause the earthquake data extraction errors, which affect seriously the late result of seismic data processing and interpretation.It may make a wrong judgement about regional geological tectonic situation, increase the project cost greatly and cause serious waste in the meantime.Shot point tracking monitoring software is developed in order to solve this problem, which can real-time monitor the physical points of seismic exploration construction area and solve the difficulty that constructor meet at work. Shot point tracking localization method is based on the earthquake (SPS).The GPS positioning and communication system of geographic information explosion,It convert84coordinates to54coordinates through coordinate conversion by the GPS positioning and communication system of geographic information explosion.The software is based on Visual Studio6.0and Qt development environments.Shot point tracking monitoring software can draw the map of work area and physical location about point theory in the software interface, pick up the actual parameters of the explosion serial data of each physical and contrast work area design and the actual location of physical points. Constructor can master accurately work area information..It can provide a reference for constructor about improving the quality of data collection, So as to guide field production better.