| Along with aviation technology development, more and more requirements have been advanced to compressor test facility capacity. Comparing with advanced compressor test facility overseas, there is still a long distance for internal test facility in test capacity, test range and test means. If we don't do something to change the actuality, met the requirements of times development. the distance between us and other countries in high-compression ratio compressor test research field ,consequently influence the step of complete engine research.This article is based on the above background, combined with the equipment overall design requirements, of a compressor tester of. The purpose of the reform is to improve the tester maximum speed, increasing the test range. Improvement of content is to design a set of accelerator and its suitable lubricating device. And through the tests to verify the accelerator overall design scheme and the working reliability.The main work includes:â‘ According to the comparison of the domestic and foreign current situation, proposed the c test facility reform necessity and tansformation,Transformation includes a accelerator and supporting equipment.â‘¡According to the general requirements on the accelerator and lubricant equipment, plan research.â‘¢It introduces the accelerator and lubrication design of process equipment.â‘£It introduces the test device, test method, test result shows that after the transformation to the compressor test facility indicators meet the requirements. |
