| The industry of semi-conductor products manufacturing was keeping prospers in the recent 10 years. In order to improve the shares and competencies in international market, cooperative R&D or innovation among the semiconductor products manufacturers was wildly spread more and more. The semiconductor products manufacturers expected to improve the technologies and products competencies through the cooperative R&D projects. However, it was necessary to implement the investigation from theoretics and realities on how to manage the cooperative R&D projects, what problems need to be assessed during the planning, and which mode to choose. Combining with the characteristics of semiconductor products manufacturer industry, this article would like to analyze and discuss the R&D collaboration mode and try to provide useful selection for reference among the modes of R&D collaboration.Based on the previous research and concerned to theoretics and present cooperative modes of semiconductor products manufacturer industry, this article analyzed main factors, which effected the selection of modes in R&D collaboration of semiconductor products manufacturer industry, and deduced the conclusion through the investigation. The LOGIT model was used based on the examples from Chinese PR semiconductor products manufacturer industry.The main pattern of the article was as following. Firstly, the article analyzed the situation of R&D collaboration of Chinese PR semiconductor products manufacturers, summarized the reference literatures, and illustrated the thoughts and investigation methods of the article. Secondary, the article categorized the modes of R&D collaborations and analyzed the each categories characters from theoretics. After those, the article discussed the possible factors, which would effect the selection of the modes, and analyzed the factors individually. We surveyed many samples of R&D collaboration projects among the several manufacturers of Chinese PR semiconductor industry. And then, the key factors were found so that we could get the suitable evaluation model. The last part of the article presented the research conclusion, author expectation, and suitable evaluation model of mode selection in the R&D collaboration of semiconductor products manufacturing industry and gave out the most effective key factor.The article gave out a suitable and guidable evaluation model for the selection in the R&D collaboration of semiconductor products manufacturing industry by surveying the real R&D collaboration projects of semiconductor products manufacturing industry, implementing management theoretics of collaboration projects, and using LOGIT Regression Analysis. However, the objects only covered semiconductor products manufacturing industry in Chinese PR so that the conclusion did not suit for Chinese Taiwan or other countries and areas. Thus, the authors made the expectations for the research on the mode selection of R&D collaboration in the semiconductor products manufacturing industry. Those were more special objects, more different samples, more effective factors, and advanced investigation on Regression Analysis, which was applied contract collaboration. All these would possibly make the positive and guidable meaning for the research conclusion. |
