By analyzing the situations of the equipments for detection automobile brake functionhome and abroad, we designed the equipment for detection automobile brake parametersbased on linear CCD (IT-P1-1024),FPGA (EP2C35) &MCU(89C52).The hardware frame and the methods to calculate the automobile brake parameters aremainly discussed in this thesis.With regards to the hardware design, we use the FPGA to generate a set of strictclocks. Some are provided necessarily for driving the CCD scan the same ground twiceand does it again and again, some are use for control the A/D IC namedAD9057BRS40(A/D,8-bit, 40MSPS), which can sample the designation data among theout of CCD; Also we use the FPGA to realize some control circuits, such as the denouncedcircuit of the keyboard; Also we use the FPGA to realize some control circuits, such as thedebounce circuit of the keyboard;With regards to the software design, I have realized the Fast Fourier Transform(FFT) and Inverse Fast Fourier Transform(IFFT) Algorithm to analyze the correlationfunction to calculate automobile speed; I analyses the method of calculating the parametersof automobile brake such as average decrease speed. Software has realized LCD displayingalso.At the end of this paper, I analyze the error of this system and the matters whichmust be taken great attention to. |