The Design & Research Of Computer Application System In Laser Carving Inside Glass Machine

Laser carving inner glass machine carves three-dimesional object inside body of glass,and makes glass into art pleasing both eye and the mind. It is a kind of high science and technology production of light and mechanic and electricity. The machine has good market foreground.Computer technology,as a indispensable means and tool in modern manufacture and life,plays a important role in development of laser carving inner glass machine. The paper introduces reasonedly the following contents:the design of laser carving inner glass control system,the development of three-dimensional processing software and the design of communication module. All of above base on the principle of the laser carving inner glass machine.The control system of the machine uses PC 104 boards as central device,and it realizes the carving procedure control and the debugging requirements. The paper presents the application of PC 104 boards selected,and gives the software structure of control system.Based on DXF,we get the object surface that has been triangulized. We have done a lot of experiments on the dimensional object surface interpolation,and concluded a serials of methods that have practical sense. The paper also makes primary research on the problem from the point of view in Computer Graphics. So the methods have the sense at large.We also have designed a reliable means that can perform serial communication between high performance PC and PC104 board in the paper.