Research About The Preparation Of Fittings Data In Hongta ERP

One of the most difficult problems during the cause of the application of ERP in national enterprises is the preparation of fundamental data. Whether the data preparation is successful or failed is a key factor of whether the project will be succeeded or failed.Integrating the practical complexion during the application of the Hongta ERP project, the author, in the dissertation, makes a deep investigation and analysis to the management-actuality and data-actuality of those fittings in Hongta. The dissertation works strictly over the operation-flow reformation and the data reformation during the management about those fittings, and also over the analysis and coordination about the data of those static ones. At the same time, the paper also stresses over the practical technique about the application of the data preparation. In the session of the operation-flow reformation and the data reformation, the paper analyses deeply the problems about the operation-flow in the management of fittings and the problems about those data of fittings and then brings out an aim and a pattern for the fittings-stock and the operation-flow about the storage management and also brings out a method for the fittings-data-reformation. We can see that, the paper has resolved the problem about the optimizing of the operation-flow of fittings-data-management and the problem of the conformity of those masses disperse fittings data. In the session of the analysis and coordination of those static data of fittings, on the basis of the reformed data of fittings, the paper establishes both a scientific classifying principle and also a rational coding system, which resolved the problem of the fittings-data- standardization. In order to control the actuality and the rate of overlapped codes, the paper has designed data-preparation programs and data-switch programs and data-checking ones through database programming technologies. At the end of the paper, the author gives us an analysis about the effect of the fittings data application.The paper brings forward a suit of systematic method in the data preparation of fittings, and brings the fittings data preparation in the Hongta ERP project to a big success, without a guide of any ready-made theory or any succeeded precedent used for reference. And the method has acquired good effect. So, we can say, the method, that the paper brings forward, is feasible and advanced. It has its referent sense for the application of other parts of the Hongta ERP project, for the ERP project application of any other national enterprises and even any gigantic enterprises. In further, it even has its means for those data preparations of any big projects.