Research On The Green Glamping Device System Driven By The Linear Motor

Abstract At present, the vast majority of the mobile fixtures using in the field of machinery manufacturing are the hydraulic or pneumatic transmission fixture. The energy transfer line of the two types of the fixtures will result in greater energy loss because they go through a number of links from the energy input to mechanical output clamping component. In addition, the hydraulic transmission will cause environmental pollution due to the evaporation and leakage of the oil. Therefore, the fluid transmission fixture cannot meet the requirement of development of green manufacturing.This paper focuses on how to use the linear motor in the clamping fixture, and theconcrete results achieved are as follows:(1)Provide the necessary information for application of the linear motor in the different fixtures through analysis the technology of the linear motor.(2)Put forward a series combination of self-locking force agencies combined with linear motor, in order to resolve the technical issues of lacking of output force of the linear motor and maintain a stable force when the linear motor is not moving and break the key issue in the application of the linear motor in the fixture.(3)Analysis force agency more systematically, research and develop more innovative series combined with institutional self-locking system, and give the formula of the different mechanics and technical performance graphic curve for reference of the engineering and technology.(4)Design a variety of clamping devices driven by linear motor and based on self-locking agencies force, and illustrate its working principle and technical characteristics for the application of the technology in the field of machinery.The clamping device driven by the linear motor in this paper is a clamping of green technology, which has the following prominent advantages:(1)There is no environmental pollution.(2)Driven by the power directly can have short energy transfer line, less energy conversion devices, higher energy efficiency and the overall costs can be reduced significantly.(3)The linear motor stop working during the processing, so the clamping device will not consume energy.(4)The clamping device will needn't a huge reducer just as that clamping device driven by the rotating motor rotating-linear motion conversion mechanism, thus it has compact structure and low manufacturing costs.