The Design Of Architecture Material Automated Measuring System

Formerly concrete pressure resistant test and steel reinforcing pull resistant test were done by the omnipotence tester.By the reading of the dial plate,the data is calculated artificially and the curve is protracted,operation is complex,artificial factor is mighty.the control system of the tester has been a pivotal restrict factor that blocks the improvement of experiment ability and degree of automation.The application of the electromotive technique on the original tester,can test concrete and the max intension of the resist pressure and pull of the reinforcing steel,realize intellective management of experimental data.This system is innovative design in the civil engineering.The paper through the analysis to architectural material's capability test theory and test method,designed a pair of auto-test system,realized the rejuvenation of omnipotence tester control system from simulative signal to digital siginal through industry control calculator,system programe and intelligent device.architecture material auto-test system realize auto-test on the base of weight handing : automating test the pressure intensity and elasticity parameter of concrete; automating test the einforcing steel pull resistant and bend intensity of steel;get at a P-t curve.In the same time,can form the measurement report by automating,reduced artificial error,improve work efficiency.On the base, organizate a system of material test gata control,reccording to the control request of check branch,make all sort of statistion,sum and amount analysis.Greately improve the efficiency,practice level and check level of control work.At the last part of this paper,make out a detailed test report and test curves,and analyses mostly report and data processing of curve.In the tag, some disadvantages and ameliorations of the system have both been brought forward.