Design And Calculation Of Oil Recvery Vehicle With Rear Mast

The oil recovery vehicle with rear mast is a main kind of truck-mounted mobile oil production equipment, the special devices such as P.T.O, angle gearbox, winch and mast are installed on the chassis to realize the function of oil production operation. It gets power from chassis engine and the power is delivered to the winch via P.T.O, drive shaft and angle gearbox, and the winch drives the wireline via the mast to put the swabbing device into the oil well for the oil production operation.The article analyzes the site application and exsisting condition of Production Truck thoroughly through abundant survey. The whole project and technical parameters are fixed on the base of it. The critical components are optimized and designed reliably to improve the product capability .It analyzes the strength of critical components and fix danger stress distributing by using three-dimensional modeling and finite element analysis method. And optimize the critical components according the result to make sure the technical parameters of critical components of Production Truck reach the design requirements.The article mainly consists of oil recovery vehicle survey and study, entire concept design, key parts design and calculation and testing, it focuses on the design and calculation of mast, winch and gearbox.