Design And Study Of Solid Carbide End Milling Cutter For Hing-Speed Cutting

High-speed machining (HSM) has become the main trend in the machining field, high-speed milling cutter is one of the crucial technologies to achieve high-speed machining. As a result of its many advantage as good cutting property, excellent machining, surface quality and so on, helical end milling cutter is applied in high-speed machining widely, especially in complicated surface, and–scale helical end integrated part in aircraft. It is very difficult to design and manufacture milling cutter because its intricate geometry configuration.Here through analysis in high speed machining aluminum alloy used for aircraft, then we give you a properly geometry model and dimensional diameter. By classified the head figure of end milling cutters, on the basis of their sort, the geometry parameters are depicted, the curve expressions of edges and sections are founded. By the powerful expression function and some skills as sweep, Boolean of UG the proper geometry model of end milling cutter is achieved. Three-dimensional model can be created into planar engineering drawing and guided into finite element software ABAQUS to actualize analysis.Base on the property of cutter in HSM as force and vibration, refer to classics literature and handbook of overseas, contacting material property, establish proper configuration parameters adapt to HSM. On the basis of a large number Cutting experiments, reasonable cutting parameters has got. At the same time, some components has become internationalization.