The Mechanism Innovative Design For The Automatic Bookbinding Machine

With the development of the finance trade and the office automation,the need for an automatic bookbinding machine increases in the market. And with development of the environment protection consciousness of the people, the performance of the automatic bookbinding machine is increased. Just based on that case, the automatic bookbinding machine without air pollution was designed and produced. But it has some disadvantages, such as the high rate of breakdown and the quick worn-out of the key parts etc. Especially it is still a kind of half-automatic machine. So a new kind of full automatic bookbinding machine should be designed innovatively. Theperformance of it should be enhanced and the trouble rate should be decreased. The new machine will meet a need of the market.Three parts make up of innovative design of the automatic bookbinding machine in the thesis.Firstly, the primary automatic bookbinding machine is designed innovatively with TRIZ. The new drive system made up of gear and helix is designed. It is proved by experiments that the new machine has the same function and automatic degree as the old. But the reliability of the new machine has been enhanced and the trouble rate has been reduced greatly.Secondly, bookbinding equipment and a detent which are the key parts of the automatic bookbinding machine have been designed with Innovative Theory of Combination. And a time performance of work for the machine has been assembled. So a new kind of full automatic set has been innovatively designed.Thirdly, the bookbinding equipment and the detent have been innovatively designed with Innovative Theory of Yan Hongsen. Four kinds of new bookbinding equipments and fifty-four kinds of new detents have attained. So a lot of the optimization design of the automatic bookbinding machine can be got.