Analysis Of Processing Precision And Research Of Assembly Craft For Key Components Of Rotation Cuts

Rotation cut is the most important equipment in all-cutting units of Aluminum production lines. It is mainly used in cutting Aluminum plate into fixed sized plates when they are moving. At present this kind of equipment mainly depends on import in the domestic that is just because it cost too much. Carries on the manufacture domestically to it has vital significance and the economic value. This article mainly research on rotation cuts in the triturating the essential spare part processing and the assembly craft questions.The thesis has analyzed the domestic aluminum sheet, the foil processing enterprise's development situation and the equipment technical level, Symmetrically analyzed the principle of work, the main organization characteristic, the essential spare part function and its the processing matching requirement by the Liaoning metallurgical equipment research institute which the development the rotation cuts. In this foundation, earnestly studies the correlation design paper and the technical document, gives the hypothesis to some essential components technical parameters again it has formulated the effective processing craft and the assembly method.The crank processing precision direct influence rotation upside cuts, lower cuts the edge the assembly precision, was decided cuts the quality of aluminum sheet. This article multi analysis crank unique feature and the design specification, to design the specification according to the actual processing and the assembly process to carry on the adjustment. Although increased some craft specifications, enhanced the single unit processing cost, but greatly reduced the assembly difficulty actually, has guaranteed the equipment manufacture precisionThis article multi analysis crank unique feature and the design specification, to design the specification according to the actual processing and the assembly process to carry on the adjustment. Although increased some craft specifications, increased the single unit processing cost, but greatly reduced the assembly difficulty actually, it guaranteed the equipment manufacture precision.This article is a main elaboration of questions, which appears in the process of in the gear processing of a decelerator of the Rotating cut Such as after cementation or quenching, it appears cracks, micro cracks after rubs truncates, and so on. The author focus on heat treatment fire craft, quenching rubbed truncates, craft parameter, and propose new viewpoint and method. The implementation has obtained the good effect.The assembly question about the rotation cut, this article in view of the assembly technology difficulty has designed the easy and feasible craft work clothes, simplified the assembly process complex degree greatly, enhanced the working efficiency, has guaranteed the product technical performance target completely.This article proposed the easy and feasible installment of the rotation cuts assembly effectively. Put the complex questions into simplification. Tt greatly enhanced the working efficiency, reduces the strength of assembly work and also completely guaranteed the product technical performance and the target.In brief, there is also a great deal of work to do in studying the rotation cuts. Proposed the related solution. This article revolved the key, which the rotation cuts to make the system analysis, and the research, proved tiiese methods and the technology are feasible, and also proposed a new mentality and method for the later other non- standard equipment processing and the assembly.