Mobile Robot and Manipulator for Rescue Missions - Traversability, Modularity and Scalability

Natural and man-made disasters nowadays still present a large amount of risk. Disaster response is an important phase of disaster management, and the enhancement of its effectiveness and accountability has attracted an increasing amount of attention. Robots can help rescuers in doing this task because of its wide range of applications. In general, the rescue robot concept assumes one or more targeted tasks while design, and one or a set of robot(s) is/are designed by integrating different functions to accomplish those tasks. Once the design of a robot is finished, its function cannot be changed. However, this kind of design is environment-dependent, as once a disaster environment changes, the execution performance of the robot will reduce. Furthermore the function-integrated design concept may cause internal constraints between functions, and fail to provide a targeted solution for different disaster environments.;This dissertation introduces a novel design concept, based on which a requirement-oriented rescue robot system is developed. This design concept adopts a distributed strategy, according to which tasks are no longer seen as a whole but divided into two parts: traversability and operation. Several functional modules are designed to meet the different requirements of the two parts separately, and the entire robot system can be assembled using different functional modules according to the real-time requirements of the disaster environment. Compared with the traditional rescue robot system, this system can provide a more targeted solution for different disaster situations, and is more adaptable and flexible. This dissertation details the.;This dissertation details the basic functional modules, including three kinds of mobile bases for traversability and two sets of modular joints for operation, and analyzes a quick connector that makes the connection easier and more convenient. Several possible combinations of the rescue robot system are displayed to show how to construct a rescue robot system according to different requirements. This kind of rescue robot system can provide targeted solutions to different disaster tasks. Robustness is also enhanced, as the replacement of the functional modules is flexible and easy to overhaul. Furthermore, the functional modules can be decomposed and reused to make the robot system more economical. This dissertation makes several contributions. It presents a systematic solution for rescue robot, develops three mobile bases for high traversability and two kinds of modular joints and a quick connector for rescue operation. Furthermore, it also develops a rescue robot system for missions in earthquake.