Kinematics and dynamics of robotic systems with multiple closed loops

In this dissertation the kinematics and dynamics of robotic systems with multiple closed loops, such as Stewart platforms, walking machines and hybrid manipulators, are studied. In the study of kinematics, we focus on the closed-form solutions of the forward position analysis of different parallel systems. A closed-form solution means that the solution is expressed as a polynomial in one variable. If the order of the polynomial is less than or equal to four, the solution has analytical closed-form. First, the conditions of obtaining analytical closed-form solutions are studied. For a Stewart platform, the condition is found to be that one rotational degree of freedom of the output link is decoupled from the other five. Based on this condition, a class of Stewart platforms which has analytical closed-form solution is formulated. Conditions of analytical closed-form solution for other parallel systems are also studied.; Closed-form solutions of forward kinematics for walking machines and multi-fingered grippers are then studied. For a parallel system with three three-degree-of-freedom subchains, there are 84 possible ways to select six independent joints among nine joints. These 84 ways can be classified into three categories: Category 3:3:0, Category 3:2:1 and Category 2:2:2. It is shown that the first category has no solutions; the solutions of the second category have analytical closed-form; and the solutions of the last category are higher order polynomials. The study is then extended to a nearly general Stewart platform. The solution is a 20th order polynomial and the Stewart platform has a maximum of 40 possible configurations. Also, the study is extended to a new class of hybrid manipulators which consists of two serially connected parallel mechanisms.; In the study of dynamics, a computationally efficient method for inverse dynamics of manipulators based on the virtual work principle is developed. Although this method is comparable with the recursive Newton-Euler method for serial manipulators, its advantage is more noteworthy when applied to parallel systems. An approach of inverse dynamics of a walking machine is also developed, which includes inverse dynamic modelling, foot force distribution, and joint force/torque allocation. A new approach is then proposed to determine the foot distribution of a planar walking gaits based on two optimum criteria. A computational scheme is then developed to determine the joint force/torque allocation, on the basis of the virtual work principle. As an illustration, the inverse dynamic modelling of a quadruped with pantograph legs is derived. The inverse dynamics of this quadruped walking in different wave gaits is then studied.