| Techniques for efficient and systematic design and analysis of transient nonlinear coupled problems are presented. This class of problems includes systems with history dependent material response, e.g. plasticity. The traditional finite element analysis is combined with sensitivity analysis and numerical optimization to obtain a systematic design algorithm. Sensitivities for a generalized response function are formulated with respect to design parameters, i.e. shape, applied loads, prescribed initial and boundary conditions, and material properties. The generalized response functional depends on the design parameters both explicitly and implicitly through the system's response, e.g. temperature, heat flux, displacement, plastic hardening, stress, strain and reaction forces. Analytic sensitivities are formulated via both the direct differentiation and adjoint methods. The formulations are particularized to the case of rate-independent elasto-plasticity. Analytic sensitivities for weakly coupled thermo-elasto-plastic systems are computed with the finite element method by implementing the direct differentiation method.;The solution process for the transient nonlinear coupled problems uses the Newton-Raphson iteration method so that analytic design sensitivities may be readily evaluated. The formulation is particularized to elasto-plastic and weakly coupled thermo-elasto-plastic systems by implementing the algorithmic tangent operator. A systematic numerical approach to compute the algorithmic tangent operator is formulated that facilitates systematic and modular computer implementation.;A simple one-dimensional problem with an analytical solution is studied to demonstrate the adjoint and direct differentiation sensitivity evaluation for rate-independent elasto-plasticity. The finite element method is used to perform the weakly coupled thermo-elasto-plasticity analysis and sensitivity analysis for more complicated problems. The sensitivity computations are compared with expensive finite difference approximations for verification purposes. The analysis and sensitivity analysis capabilities are combined with numerical optimization to optimize the design of a butt weldment with respect to both manufacturing and service life aspects. |
