| Catalysis will continue to be vitally important to the advancement and sustainability of industrialized societies. Unfortunately, the petroleum-based resources that currently fuel the energy and consumer product needs of an advancing society are becoming increasingly difficult and expensive to extract as supplies diminish and the quality of sources degrade. Therefore, the development of sustainable energy sources and the improvement of the carbon efficiency of existing chemical processes are critical. Further challenges require that these initiatives are accomplished in an environmentally friendly fashion since the effects of carbon-based emissions are proving to be a serious threat to global climate stability.;In this dissertation, materials being developed for sustainable energy and process improvement initiatives are studied. Our approach is to use materials characterization, namely advanced electron microscopy, to analyze the targeted systems at the nano- or Angstrom-scale with the goal of developing useful relationships between structure, composition, crystalline order, morphology, and catalytic performance. One area of interest is the complex Mo-V-M-O (M=Te, Sb, Ta, Nb) oxide system currently being developed for the selective oxidation/ammoxidation of propane to acrylic acid or acrylonitrile, respectively. Currently, the production of acrylic acid and acrylonitrile rely on propylene-based processes, yet significant cost savings could be realized if the olefin-based feeds could be replaced by paraffin-based ones. The major challenge preventing this feedstock replacement is the development of a suitable paraffin-activating catalyst. Currently, the best candidate is the Mo-V-Nb-Te-O complex oxide catalyst that is composed of two majority phases that are commonly referred to as M1 and M2. However, there is a limited understanding of the roles of each component with respect to how they contribute to catalyst stability and the reaction mechanism. Aberration-corrected electron microscopy was used to systematically examine, atomic column by atomic column, the effect of elemental substitution on the long-range crystalline order, atomic coordinates, and site occupancies of the various formulations such that trends could be developed linking these properties to catalytic yields. To accomplish this task, an algorithm was developed that enabled the direct extraction of atomic coordinates and site occupancies from high-angle annular dark-field (HAADF) images to within 1% and 15% uncertainty, respectively. Furthermore, this general method could be applied to various crystalline systems and may dramatically improve the quality of initial structural models used in Rietveld refinements. Improvement in the quality of starting models may increase the structural and chemical complexity of inorganic structures that can be solved by using "powder methods" alone. In addition to the development of these trends, HAADF analyses also revealed the presence of coherent compositional miscibility gaps, rotational twin domains, and structural intergrowths in the complex Mo-V-M-O oxide system.;Other catalytic systems that are addressed in this dissertation include Pd, Ag, and bimetallic Pd-Ag catalysts for the selective hydrogenation of acetylene in excess ethylene, alkali and alkaline earth promoted Ru catalysts for the production of clean hydrogen through the decomposition of ammonia, the production of Pt nanoparticles using dendrimer templates, and Pt-Re bimetallic catalysts for the conversion of glycerol to hydrocarbons and syn gas. In each of these studies, electron microscopy was used as a complimentary tool to synthetic and reaction studies to better understand interactions between the nanoparticles and the support/template, to determine the effect of adding various promoters, or to understand the nanoscale structural and chemical changes associated with the formation of bimetallic nanoparticles.;A final area addressed in this dissertation is the interaction between the electron beam and the specimen. In one particular study directed toward the characterization of Ni-Bi nanomaterials, it was discovered that exposure to an intense electron beam initiated particle fragmentation that led to the formation of a field of nanoparticles. Subsequent microscopy studies of the resulting nanoparticle field revealed bimetallic nanoparticles, core-shell structures, Angstrom-scale atomic clusters, and individual atoms that decorated the surrounding carbon substrate. The identification of these structures along with the analysis of the parent material enabled the development of a fragmentation mechanism. |
