The use of nanoparticles on nanometer patterns for protein identification

This dissertation describes the development of a new method for increasing the resolution of the current protein microarray technology, down to the single molecule detection level. By using a technique called size-dependent self-assembly, different proteins can be bound to different sized fluorescent nanostructures, and then located on a patterned silicon substrate based on the sized pattern which is closest to the size of the bead diameter. This technique is advantageous for cases when protein quantities are limited and high detection resolution is desired. It limits the required preparation time and surface modifications needed compared with other protein array techniques, and it can be used with conventional fluorescent microscopes. Its simplicity and effectiveness will be a valuable asset in the analysis of rare proteins.;The protein nanoarray was used to detect antibody-antigen binding, specifically anti-mouse IgG binding to mouse IgG. The protein nanoarray is designed with the goal of analyzing rare proteins. However, common proteins, such as IgG, are used in the initial testing of the array functionality. Mouse IgG, representing rare proteins, is conjugated to fluorescent beads and the beads are immobilized on a patterned silicon surface. Then anti-mouse IgG binds to the mouse IgG on the immobilized beads. The binding of the antibody, anti-mouse IgG, to the antigen, mouse IgG is determined by fluorescent signal attenuation. Single molecule binding was determined when the signal attenuation was enhanced with polystyrene beads and AuNP, used as tags for the antibody, and was verified by scanning electron microscope (SEM) imaging.;The first objective was to bind charged nanoparticles, conjugated with proteins, to an oppositely charged silicon substrate. Binding of negatively charged gold nanoparticles (AuNP), conjugated with mouse IgG, to a positively charged silicon surface was successful.;The second objective was to demonstrate the method of size-dependent self-assembly at the nanometer scale (<100 nm). Different-sized, carboxylated, fluorescent beads and AuNP, which were conjugated with proteins, were serially added to a patterned polymethyl methacrylate (PMMA) coated silicon surface. Size-dependent self-assembly was successfully demonstrated, down to the nanometer scale.;The final objective was to obtain a signal from antibody-antigen binding within the protein array. Conjugated fluorescent beads were bound to e-beam patterns and signal attenuation was measured when the antibodies bound to the conjugated beads. The size-dependent self-assembly is a valuable new method that can be used for the detection and quantification of proteins.