3-D finite element analysis - Globe Thesis

Keyword [3-D finite element analysis] Result: 1 - 20 \| Page: 1 of 2
1.	The Design,Initial Application And Optimization With 3D Finite Element Method Of Sleeve Prosthesis For Revision
2.	The 3-D Finite Element Analysis Study Of The Stress Distribution And Displacement Of The Maxillary Transversal Distraction Osteogenesis
3.	The 3-D Finite Element Analysis Of Distalization Of Maxillary First Molar In Three Different Orthodontics Forces
4.	3-D Finite Element Analysis Of Peridental Stress Distribution When Impacted Teeth Are Tracted
5.	3-D Finite Element Analysis Of Biomechanical Changes Of Lower Cervical Spine In Flexion And Extension
6.	3-D Finite Element Analysis Of Biomechanical Changes Of Lower Cervical Spine In Flexion And Extension
7.	3-D Finite Element Analysis On Suture Marked Human Craniofacial Complex After RME And Maxillry Protration
8.	The Accurate Mechanical Modeling And Orthodontics Analysis Of Submaxilla Dentition
9.	3-D Finite Element Analysis Of Miniscrew Optimal Design
10.	Effect Of The Core Height And Elasticity Modulus Of Posts On Stress Distribution Of Post-Core Crown Prostreses: 3D Finite Element Analysis
11.	The 3-D Finite Element Analysis Of The Implement Of Tip-Edge Orthodontics
12.	Establish 3-d Finite Element Models For Local Skin Flaps And Find Their Biomechanical Law By Model Simulation And Analysis
13.	Physiologic Bite On The Effect Of Mini-implants Close To The Implant-bone Interface Stress Distribution-3D Finite Element Analysis
14.	Biomechanical Assessment Of Implant Supported Removable Partial Denture:3-D Finite Element Analysis Study
15.	Influence Of Four Methods To The Stress Distribution Over Loading Of Mandibular First Permanent Molar With Different Degree Of Defect
16.	3-D Finite Element Analysis Of Maxillary Anterior Teeth Lingual Retraction Force System Using Micro-Implant Anchorage
17.	Tooth Movement Tendency With Different Traction Position In Lingual Orthodontics: A 3-dimensional Finite Element Analysis
18.	Three-Dimensional Finite Analysis Of Different Repair Methods For BO Defects Of The Mandibular First Molar
19.	Interradicular Angle And Root Trunk Height Of First Mandibular Molar On Its Immediate Loading After Immediate Implant:a 3-D Finite Element Analysis
20.	3-D Finite Element Analysis Of Endodontically Treated Mandibular First Molar With Overlay Restoration
<<First <Prev Next> Last>> Jump to