the design of "face" - Globe Thesis

Keyword [the design of "face"] Result: 41 - 60 \| Page: 3 of 10
41.	Research On Mechanism Of Pipe Roof Reinforcement And Tunnel Face Stability
42.	Research On Some New Techniques For Forming Simulation Software Platform Of Automobile Panel
43.	Analysis Of Face Instability Of Shield Tunnels With Consideration Of Groundwater Seepage
44.	Analysis Of Shield Tunnel Face Stability
45.	Advanced Information Analysis And Optimization Research For Foundation Rock Of High Concrete Gravity Dam
46.	Study On The Mechanical Behaviour Of Subway Construction In Cobble Stratum Based On Granular Discrete Element Method
47.	Research On The Design Of Weak Rock Road-Slope
48.	Researchs On The Design Of Contemporary Complex Architectural Form
49.	Study On Stability Analysis And Control Of Subsea Tunnel Surrounding Rock
50.	Study On Impact Of Big Gradient And Curve In Small Radius On The Stability Of Shield Tunneling Excavation Face And The Stress Of Segment
51.	Study On Progressive Failure Of Soil Particle When The Shield Tunnel Across The Hole And The Design Of Reinforcement Refinement
52.	The Design Of Survey Strategy System And Optimization Of Fiber Allocation Algorithm
53.	Mechanical Analysis Of Rock Breaking By Disc Cutter During Shield Tunneling In Mixed Face Ground Conditions
54.	Study On The Flowing Properties Of Fluid With Variable Viscosity In The Oil Film Face Seal Gap And Its Application
55.	Research On The Design Of Subject In Modern Space Teaching
56.	The Design Of High Frequency Projectile Impact System And The Experiment Research
57.	Face Laminates Of Sandwich Panel Of Cold-formed Steel Buckling Properties Of The Foam Core Support
58.	.330 Mw Power Plant Hedge Boiler Furnace Process Of Numerical Simulation And Experimental Study And The Four Corners Of Boiler Design And Research Of The Load Of Common Procedures And Furnace Process
59.	Research On The Design Theory Of Super Heavy-duty Armored Face Conveyor Planetary Transmission
60.	Research On Key Techniques Of Parametric Design For Stamping Die Face Of Auto Body Panel
<<First <Prev Next> Last>> Jump to