solid particles - Globe Thesis

Keyword [solid particles] Result: 1 - 20 \| Page: 1 of 2
1.	Research On Theory And Test Equipment Of Contaminant Solid Particles Influencing Lubrication And Wear Of Piston Ring And Cylinder Liner
2.	The Horizontal Axis Of The Spiral Hydraulic Characteristics And Solid Particles Suspended Mechanism Pilot Study
3.	Study On The Friction Loss Of Hydraulic Lifting Large Solid Particles In Vertical Pipeline
4.	Study On Advanced Treatment Of Yellow River Reservoir Water By Ozone And Ozone/Hydrogen Peroxide With Biological Activated Carbon Technology
5.	The Study On Effects Of Rotational Coriolis Force Upon Solid Particles Movement In Small-scale Rotational Multiphase Flow
6.	Investigation On Mechanism Of Heat Transfer Intensification Of Solid Particles In Vapor-Liquid-Solid Three-Phase Evaporating Pipe
7.	Investigation On Mechanism Of Heat Transfer Intensification Of Solid Particles In Vapor-liquid-solid Three-phase Evaporating Pipe
8.	Red Phosphorus Combustion To Generate Solid And Liquid Particles Of Smoke Extinction Study
9.	Lubricating Solid Particles Of Pollutants On The Piston Ring - Cylinder Liner Lubrication Performance Impact
10.	Characterization Of Road Topography And Effects Of Solid Particles On Wet Adhesion Properties Of Tread
11.	Separation Of Small Solid Particles Based On Ultrasonic Rotary Driving
12.	Detection Of Water Quality Based On Atomic Force Microscopy
13.	Research On The Classification And Detection Of Solid Particles In Marine Hydraulic Oil
14.	Study On The Influence Of Solid Particles On Non-steady-state Thermal El Astohydrodynamic Lubrication Of Spur Gears Running-in
15.	Research On The Piston Ring- Liner Friction And Lubrication Considering The Influence Of Dynamic Responses Of Cylinder Liner And The Solid Particles In The Oil
16.	The Research On The Trajectory And Distribution Of Solid Particles In Hydraulic Tank
17.	DSMC Simulation Of Convective Heat And Mass Transfer Between Fine Particles And Gases
18.	Motion Characteristics Of Solid Particles In Insulating Oil And Their Influence On Breakdown Voltage Of Insulating Oil
19.	Optimization Of Ultrasonic Surface Rolling Process Equipment And Its Effect On Solid Particles Erosion Performance Of Ti-6Al-4V
20.	Study On Multiphase Flow Field And Bearing Capacity Of Tapered Hydrostatic Sliding Bearing
<<First <Prev Next> Last>> Jump to