pressure flow - Globe Thesis

Keyword [pressure flow] Result: 61 - 80 \| Page: 4 of 5
61.	Measurement Features Of Axially-Installed Near Infrared Detector Gas-Liquid Two-Phase Flow
62.	Study On Meso-mechanism Of Influencing Factors On The Discharge Flow Pattern And Lateral Pressure Of Silo
63.	PFC Numerical Simulation Of Silo Unloading Pressure Considering The Influence Of Silo Diameter
64.	Research On Detection And Location Method Of Heating Pipeline Leakage Based On Two Parameters
65.	Flow Induced Vibration Mechanism Of Dense Flexible Tube Bundle
66.	Reconstruction And Operation Optimization Of Central Heating System In UPC Dongying Campus
67.	The Oil Film Temperature Research On The Floating Flow Distribution On The High Pressure Vane Pump
68.	Research On Atomization Characteristics In High Speed And Low Pressure Flow
69.	Design And Noise Reduction Characteristics Analysis Of A Skin Structure With Built-in Vibration Isolation Unit
70.	Influence Of High And Medium Pressure Flow And Pressure Fluctuation On Sealing Performance Of Aircraft Hydraulic System
71.	The Aerodynamic Characteristics Of A Streamlined Box Girder In Sinusoidal Oscillating Flow At Large Angle Of Attack
72.	Study On Dynamic Side Pressure Of Silo With Different High Diameter Ratio
73.	Study On Discharge Flow Pattern And Dynamic Lateral Pressure Of Silo Considering The Influence Of Hopper Inclination
74.	Numerical Simulation Of Heat Transfer Of N-decane Under Supercritical Pressure In Horizontal Scramjet-engine Cooling Channels
75.	Numerical studies of the flow and pressure distribution in a PEM fuel cell flow plate adjacent to a porous gas diffusion layer
76.	Investigation of side wall effects on an inward scramjet inlet at Mach number 8.6
77.	Analysis, Simulation and Control of Peak Pressure Loads on Low-Rise Structures
78.	Analysis and prediction of pumping characteristics of high-strength self-consolidating concrete
79.	Simultaneous flow visualization and unsteady-surface-pressure measurements in normally and obliquely laminar impinging jets
80.	Experimental and computational evaluation of an ejector system utilizing a primary S-bend transition duct
<<First <Prev Next> Last>> Jump to