magnetomotive force - Globe Thesis

Keyword [magnetomotive force] Result: 1 - 20 \| Page: 1 of 2
1.	Research On Operating Characteristics And Electromagnetic Design Of A Novel Three-Phase Two-Valued Capacitor Induction Motor
2.	Studies On The Method Of Distributed And Uniformized Magnetomotive Force For High Amperage DCC Calibration
3.	Calculation Of Electromagnetic Parameters And Analysis Of Harmonic Magnetomotive Force Of Stator Wingding Of Powerformer
4.	Research On The Open-phase Operation In Large Turbogenerator Unit
5.	The Fault-tolerant Technology Of Six-Phase Double-Y 30°-Deflected Permanent Magnet Synchronous Motor
6.	Design And Research On Electromagnetic Properties Of Five-phase Dual-rotor Permanent Magnet Synchronous Motor
7.	The Analysis Of The Performance Of The Frictional-slot Permanent Magnet Synchronous Machines
8.	Research On Sensorless Control Of Brushless DC Motor Based On ARM-cortex Controller
9.	Study On Long Primary Double Side Linear Induction Motor Magnetomotive Force Simulation And Static Thrust Test
10.	Design And Analysis Of Low Harmonic Permanent-Magnet Motor With Fractional Slot Concentrated Windings
11.	Research On Characteristics Of In-wheel Permanent Magnet Synchronous Machines
12.	Demagnetization Study Of Line-start Permanent Magnet Synchronous Motor With Composite Rotor
13.	The Magnetomotive Force Analysis For Brushless Doubly-Fed Wind Power Generator
14.	Five-phase Bearingless Permenent Magnet Synchronous Motor And Its Control System
15.	Design,Analysis And Control Of Fault-Tolerant Permanent Magnet Assisted Synchronous Reluctance Motor
16.	Study Of Fault-Tolerant Control Strategy In A Dual-Winding Fault-Tolerant Permanent Magnet Motor Based On Conservation Of Magnetomotive Force
17.	Research On Unbalanced Magnetic Pull,Torque Ripple And Electromagnetic Vibration Suppression Of Permanent Magnet Synchronous Motor With Uneven Tooth(Slot) Pitch For New Energy Vehicles
18.	Electromagnetic Design And Performance Analysis Of A New-type Of Brushless Doubly-fed Machine With Multi-harmonic Combined Starting
19.	Composite Winding Five-Phase Induction Motor Design And Control Technologies Research
20.	Optimization Design And Comparative Study Of Magnetic Gear Motor With High Torque Density
<<First <Prev Next> Last>> Jump to