limit analysis. - Globe Thesis

Keyword [limit analysis.] Result: 161 - 180 \| Page: 9 of 10
161.	Calculation Method And Experimental Study On Ultimate Bearing Capacity Of Cave Roof In Karst Area
162.	The Study Of Blasting Vibration Influence And Control Technology On Established Tunnels
163.	The Limit Analysis Ofseismic Staility Of Slopes And Retaining Structures In Earthquake Areas
164.	Bearing Mechanism And Design Method On Rock-socketed Piles In Karst Areas
165.	Application Of Three-dimensional Upper Bound Mechanism Of Slope And Its Discretization
166.	Dynamic Response Characteristics And Seismic Stability Of Rock Slope With Small Spacing Tunnel
167.	Stress Mechanism Study And Structural Design Optimization Of Prestressed Girderless Floor
168.	The Research Of Karst Area Rock Socketed Pile Vertical Bearing Mechanism And Test Method
169.	Study On Deformation And Collapse Of Soil Stratum Above Underground Cavities Based On The Double-Arch Effect
170.	Analysis Of The Limit State Of The Welded I-Section Steel Beams At High Temperature
171.	Research On Passive Failure Of Shield Tunnel At Tunneling Face And Cross Section
172.	Deformation Limit Analysis And Key Construction Technology Of Large Axial Force Bridge Pile Foundation
173.	Three-Dimensional Continuous Upper Limit Analysis For Shallow Shield Tunneling In Undrained Clayey Ground
174.	3D Seismic Stability Of Step Slope Reinforced With Piles
175.	Compressive Behavior Of High Strength Steel Wire-mesh Reinforced Concrete Filled Steel Tubular Columns
176.	Study On Analysis Method For Grouped Pile Foundation Of Bridge In Slightly Stable Slope Area
177.	The In-plane Failure Critreion Of Steel-concrete-steel Composite Structure
178.	Research On Aseismic Mechanism And Design Calculation Method Of Gravity Wall Tensioned With Horizontally Flexible Reinforcements
179.	Three-dimensional Upper-bound Limit Analysis Of The Slope Stability During Pile Driving And The Anti-slide Mechanism Of Piles
180.	Research On Bearing Capacity Of Square Perforated Mudmats On Soft Clay
<<First <Prev Next> Last>> Jump to