hot stamping - Globe Thesis

Keyword [hot stamping] Result: 1 - 20 \| Page: 1 of 5
1.	Study On The Hot Stamping Process Of High Strength Steel Blanks
2.	Study And Simulation On The Hot Stamping Process Of Automotive Leaf Spring
3.	Research On Hot Stamping Mould Design And Numerical Simulation Of DP Steel Of Engine Dumping Plank
4.	Hot Stamping Process Research And Yield Stress Distribution Optimization Of Side Impact Beam
5.	Study On Thermo-mechanical Properyies And Phase Transformation Of High Strength Automobile Steel And Hot Stamping Of Part
6.	Study On The Application Of Hot Stamping Process In Automobile Lightweight
7.	Design Of Cooling System Of Automotive Front Panel And Numerical Simulation Of Hot Stamping
8.	Design Of The Hot Stamping Mold Of Automotive Front Floor And Analysis In The Simulated Quenching Effect
9.	Study On Hot Deformation Behavior And Hot Stamping Process Simulation Of High Strength Steel22MnB5
10.	Study On Hot Stamping Process Of High-strength Steel And Multi-field Coupled Analysis
11.	Test And Simulation Study On U-shaped Sheet Hot Stamping Mould Cooling System
12.	Investigation On The Hot Stamping Process And Criterion For Die Design Of High Strength Steel Automobile Parts
13.	Coupled Thermo-mechanical CAE Analysis On Hot Forming And The Optimization Of Mold Process
14.	Simulation Studies On The Formability Of AA7075in Hot Stamping And Cold Die Quenching Process
15.	Simulation On Hot Stamping Of Vehicle Door Anti-collision Beam Based On DYNAFORM
16.	Research On Hot Stamping Forming Process Of The Back Anti-collision Beam Of Car
17.	Study On Hot Stamping Process Of High Strength Steel22MnB5Based On Numerical Simulation
18.	Design And Manufacture Parts With Ultra High Strength Steel Based On Tailored Properties Distribution
19.	Construction Research To Hot Stamping Waste Heat Recovery System Based On Pro/MECHANICA
20.	Study Of Design And Numerical Simulation Of The Cooling System Of UHSS Hot Stamping Die
<<First <Prev Next> Last>> Jump to