Font Size: a A A
Keyword [geometrical parameters]
Result: 21 - 40 | Page: 2 of 3
21. Analysis And Optimization Of The Structure For Composite Box Girders With Corrugated Steel Webs
22. Numerical Simulation On Catalytic Combustion Characteristic Of CH4/Air Premixed Combustion In Heat Recirculation Micro-Combustor
23. Flow Characteristics And Influence Of Geometric Factors In A Bend
24. Research On The Geometrical Parameters Of Curvic Coupling Measurement Technology
25. Experimental And Numerical Simulation Of Fluid Flow In Grooved Channel For Heat Exchanger
26. Investigation On SCFs Of Circular Chord And Square Braces K-joints Under Balanced Axial Loading
27. Numerical Analysis Of The Seismic Response Of Circular Tunnels In Soil
28. Effects Of Straight Arm Part Geometrical Parameters On Performance Of Buiging-pressing Axle Housing
29. Influence Of The Geometrical Parameters Of Mixing Holes On The Exit Characteristics Of The Combustor
30. Numerical Simulation On Catalytic Combustion Characteristic Of CH4/Air Premixed Combustion In Opposed Flow Micro-combustor
31. Research On The Geometrical Parameters Measurement Of Quartz Pendulous Reed With Chromatic Confocal Sensor
32. Research On The Effects Of Valve Core’s Geometrical Parameters On Flow Characteristics In Pilot Control Globe Valve
33. Research On The Influence Of Guide Vane Geometrical Parameters On Performance Of Submersible Pump
34. Research On The Influence Of Balancing Hole Geometrical Parameters On Performance Of High-speed Centrifugal Pump
35. Research On The Influence Of Guide Vane Geometrical Parameters On Performance Of Submersible Pump
36. Design Of Geometrical Parameter Measurement Device For Orbit Based On ARM
37. Study On The Influence Of The Structural Parameters Of The Pneumatic Atomizer On The Atomization Performance
38. Experimental investigation of pulsating heat pipe performance: Effects of working fluid, geometrical parameters and nanoparticles
39. Design optimization of geometrical parameters and material properties of vibrating bimorph cantilever beams with solid and honeycomb substrates for maximum energy harvested
40. Fatigue Assessment Of Rib-to-Deck Weld In Orthotropic Steel Decks Based On Averaged Strain Energy Density
  <<First  <Prev  Next>  Last>>  Jump to