finite-elements - Globe Thesis

Keyword [finite-elements] Result: 161 - 180 \| Page: 9 of 10
161.	Research On Penetration Mechanism And Application Of Ball Penetrometer In Offshore Engineering
162.	The Analysis Of Residual Stress Of Two Layers Of Plates' With Butt Welding And Different Thickness Plates' With Butt Welding
163.	Simulation And Experimental Verification Of Core Loss Properties For Induction Motor Based On Field-circuit Coupling Method
164.	Research On Material Properties And Life Prediction Of The Remanufactured Aeroengine Turbine Disk
165.	Application Reseach On Magnesium Phosphate Cement For Rapid Repair Of Ballastless Track
166.	Analysis Of 3-dimensional Dynamic Behavior Of Vehicle And Ballastless Track Coupling System With Finite Elements
167.	Matching And Experimental Study On Exhaust Muffler Of A Passenger Car
168.	Experimental Study And Theoretical Analysis Of Load Bearing Behavior For Key Connection Of Tower Boiler Steel Structure
169.	Solution Accuracy Improvement And Adaptive Mesh Refinement For Natural Frequency Analysis Using Exact Finite Elements
170.	Experimental Study And Theoretical Analysis On Seismic Performance Of Steel Frame-double Skin Composite Wall Structure
171.	Investigation of mixed finite elements for analysis of geotechnical engineering problems
172.	Three-dimensional contact fracture problems using enriched finite elements
173.	Coupling axisymmetric and plane stress/axial finite elements for the stress analysis of an aircraft engine compressor
174.	New finite elements with embedded strong discontinuities for the modeling of failure in solids
175.	Comparison of beam and plate structural finite elements under moving loads
176.	Nonlinear flutter of curved panels under yawed supersonic flow using finite elements
177.	The analysis of adhesively bonded advanced composite joints using joint finite elements
178.	Aeroelastic wing response analysis using finite elements in a large deformation direct Eulerian-Lagrangian formulation
179.	An elasto-viscoplastic constitutive formulation for dry powder compression analysis using finite elements
180.	Large eddy simulation using tetrahedral finite elements
<<First <Prev Next> Last>> Jump to