correction factor - Globe Thesis

Keyword [correction factor] Result: 61 - 80 \| Page: 4 of 6
61.	The Performance Of The Lateral Load Distribution Of Multi Beam Rigid Connection With Continuous Box Girder Bridge
62.	Comparative Study Of Elasto-plastic Seismic Analysis Methods For Bridges
63.	Wind Load Identification And Wind-induced Vibration Analysis Of High-rise Lattice Tower Structure
64.	Research On The Calculation Method Of The Seismic Design Of Masonry Teaching Building Reinforcement
65.	Research On Stability Of Circular Steel Columns Strengthened With CFRP Based On Orthogonal Design
66.	Influence Of Different Extraction Conditions On Frequency Regulation Capability Of Heating Units
67.	Study On The Weight Of Volume Rate’s Correction Factors In Nanjing Gulou District Based On Grey Correlation Analysis
68.	Study On Stable Bearing Capacity Of X-Braced Truss Structure Of Unequal-Angle Steel In Transmission Tower
69.	Power System Partition State Estimation Based On Improved Robust Unscented Kalman Filter
70.	Simulation Research On Capacity Of Underground Intersection Connections Based On VISSIM
71.	Experimental Study On Fluid Velocity Measurement In Microchannels Based On Temperature Cross-correlation Method
72.	Research On Fuzzy Adaptive Lateral And Longitudinal Control Strategy For Intelligent Electric Vehicle
73.	Preliminary Study On Seismic Damage Prediction Method Of Masonry Structure Considering The Effect Of Ring Beam And Structional Column
74.	Experimental Study And Numerical Simulation Of CFRP Reinforced Compression Square Steel Pipe
75.	Research On Evaluation System And System Of Relay Protection Device In Distribution Network
76.	Research On Reliability Evaluation For Transformer Based On Operating State And Insulation Life
77.	Characteristics And Risk Assessment Of Windage Yaw In UHV Transmission Lines
78.	Estimation of correction factor for surface water reflection under lab and field conditions
79.	Validation of nitrogen oxides and PM correction factors for heavy duty diesel engines
80.	Recommended modified zone method correction factor for determining R-values of cold-formed steel wall assemblies
<<First <Prev Next> Last>> Jump to