abrasion - Globe Thesis

Keyword [abrasion] Result: 21 - 40 \| Page: 2 of 10
21.	Study On Anti-wear Ability Of Bionics Non-smooth Gear Surface Based On The Reverse Engineering
22.	Experimental Investigation On Seal & Lubrication In High Pressure Pump Of DME Engine
23.	Study On The Influence Of Hammer Pieces' Abrasion On Hammer Mill's Rotor Vibration
24.	Analyze Of Abrasion Damage In Hydraulic Turbine And A New Type Of Wear Resistant Material
25.	Experimental Research On Sliding Anti-wear Ability Of The Bionic Non-smooth Surface And Numerical Simulation
26.	Experimental Research On Plunger Matching Parts Of Injection Pump Worn By DME-Diesel Blends
27.	Research On Detection Methods Of Abrasion On The Surface Of Cylinder Liner Based On Image Processing Technology
28.	Study On The Design And Application Of The Abrasion Test Instrument Of Endovascular
29.	Study Of Sand-mud Abrasion, Cavitation Damage And Their Protections For The Turbines Of The Sanmenxia Hydropower Station
30.	Numerical Simulation Of The Sandy Ablation Of Centrifugal Pump Impeller Flowed Passage Parts In High Sandy Flow
31.	Study On The Rule Of Tyre Abrasion And Detection Method For Double-front-axle Steering Automobile
32.	Study Abrasive Tester And Effect Of Loads On High Chromium Cast Iron
33.	Experimental Research On The Application Of DME-Diesel Blends To The Fuel Supply System Of The Diesel Engines
34.	The Research On The Methods For Condition Monitor And Life Valuation Of Low Speed And Heavy Load Rolling Bearings
35.	Contrast Experiment Research On Plunger Matching Parts Assembly Of High Pressure Oil Pump Worn By Diesel Fuel And DME-Diesel Blended Fuel
36.	Research On Composition And Property Of Paving Cement Concrete
37.	Brake Shoes Sensor Based On CAN Bus
38.	Experimental Study On Machining Technology For Special-Shaped Surface Of Granite And Abrasion And Dilapidation Mechanism Of Tool
39.	Research On Gas-Solid Two Phases Flow In Centrifugal Impeller And Abrasion Action Of Blades
40.	Preparation And Application Of Wear Resistance And Corrosion Resistance Compound Materials On Surface Of Grab Bucket Board For Loading Machine
<<First <Prev Next> Last>> Jump to