Three-Dimensional Flow - Globe Thesis

Keyword [Three-Dimensional Flow] Result: 61 - 80 \| Page: 4 of 6
61.	Study On The Influence Of The Cross Dam And Guide Wall In The Front Of The Shoal On Diversion Ratio Of Flow Discharge And Sediment Transport Of Dongxikou Channel
62.	Large Eddy Simulation Of Three-dimensional Flow Field In An Integrated Afterburner
63.	Flow Distribution Simulation And Experiment Study Of The Jet Deflector Servo Valve's Pre-stage
64.	Analysis Of Three-dimensional Flow Field Of Grid Flocculation Tank Based On FLUENT
65.	Optimization Design Of Aerodynamic Performance For The High Pressure Compressor In Gas Turbine
66.	Experimental Study Of Electricity Generation Of Air-breathing Microfluidic Fuel Cells And Stacks With Three-dimensional Flow-through Anodes
67.	Numerical Simulation And Optimization Of Three-dimensional Flow Field In A Superheater Of Certain Marine Boiler
68.	Aerodynamic Design Of Marine High Power Axial-compressor
69.	Study On Three-Dimensional Flow And Photo-Thermal Radiation Effect Of Rocket Engine
70.	Research On Cascade Design And Performance Prediction Of Hydraulic Torque-Retarder Assembly
71.	Research On Underwater PIV Measurement Technology And Flow Mechanism Of Wake Field Of Model Ship
72.	Dynamic Response Analysis Of Pier Under The Action Of Water Flow
73.	Study On Three-dimensional Flow Field And Steady-state Characteristics Of Wind Turbine Tower
74.	Calculation And Analysis Of Three Dimensional Flow Field Of Large Air Cooled Turbo-generator
75.	R&D On An Analytical Code For Flow Induced Vibration And Fretting Wear Of Heat Exchange Tube In Steam Generator Of Fast Reactor
76.	Study On Aerodynamic Load Of Wind Turbine Blade Considering Three- Dimensional Flow Field And Aeroelasticity
77.	Numerical Simulation Of Three-Dimensional Flow Field In The Slurry Pump With Lateral Inlet
78.	Study On The Calculation And Control High Pressure Common Rail System For Marine Diesel Engine
79.	Study On Nozzle Structure Optimization Of Diesel High Pressure Common-rail Electronic Fuel Injection System
80.	Fully three-dimensional and viscous semi-inverse method for axial/radial turbomachine blade design
<<First <Prev Next> Last>> Jump to