Font Size: a A A
Keyword [The least square method]
Result: 1 - 20 | Page: 1 of 2
1. Study On Technology Of Orientation And North-Finding Based On Fiber Optic Gyroscope
2. The Study On Optimization Fitting Of The Turning Mechanism And Engine Test Data Of Vehicle
3. Harmonic State Estimation Of Singular Value Decomposition-based And Harmonic Source Location Research
4. Study On Data Fusion Technology Of Spatial Signal Processing Methods
5. Study On The Evolution Of Pore Structure And Creep Features Of Sandstone Under The Coupling Action Of Stress And Seepage Flow Of Chemical Solution
6. Long-span Prestressed Concrete Continuous Girder Bridge Construction Control Analysis
7. Research Of On-line Parameter Identification For Asynchronous Motor Based On Improved Least Squares
8. The Research And Application Of Heating Load Forecast Based On The Least Square Method
9. Single Flow Nickel Zinc Battery Pngv Equivalent Circuit Modeling And Performance Analysis
10. Model Identification And SOC Estimation Research Of Nickel-Hydrogen Power Battery
11. The Dynamic Characteristics Research Of Prestressed Anchorage Structure’s Exposed Section
12. The Application Research Of Generalized Predictive Control In Thermal Power Unit Load Control System
13. The Numerical Simulation Research On Deformation Of Continuous Girder Bridge Based On Fiber Monitor
14. Research About Voltage Sag On The Influence Of The Load Of Low Voltage Tripping
15. Research On Fault Early Warning Method Using Data Analysis For Wind Turbine Pitch System
16. Research On Modeling And Transient Characteristics Of Electronic Current Transformer
17. Reseach And Implementation Of Frequency Measurement Method Based On Regression Analysis
18. The Test Research And Modeling Of Data-loss Rate And Time-delay About Structural Vibration Control Based On WSN
19. Research On Control System Of Permanent Magnet Synchronous Motor
20. The Quantitative Detection Research Of SF6 Characteristic Decomposition Component H2S Based On Cantilever Enhanced Photoacoustic Spectrometry
  <<First  <Prev  Next>  Last>>  Jump to