Subroutine - Globe Thesis

Keyword [Subroutine] Result: 61 - 80 \| Page: 4 of 5
61.	Experimental Study On The Residual Bearing Capacity Of Cross-laminated Timber Wall After Fire Exposure
62.	Bearing Capacity And Deformation Analysis Of Laterally Loaded Offshore Single Pile
63.	Research On The Experiment And Application Of Asphalt Pavement Structural Parameters
64.	Research On Fatigue Life Prediction Method Of Axle Material Based On Crystal Plasticity Finite Element Model
65.	Study On Seismic Performance Of Self-centiering Damper By Using Friction Energy Consumption Through Wedged Sliding Blocks
66.	Study On Vibration Reduction Performance Of NGW Planetary Reducer With Fe-Mn Base Inner Gear Ring
67.	Study On The Treatment Of New Type Of Lightweight Foamed Concrete On Soft Soil Foundation Of Expressway
68.	Study On Fracture Criterion And Damage Model Representing The Strain Rate Dependent And Anisotropic Behavior Of Aluminum Alloy
69.	Finite Beam Element Model Of Steel-Concrete Composite Box Girder Bridge Considering Various Mechanical Behaviors And Time-Varying Effects
70.	Study On The Mechanical Properties And Constitutive Model Of Brain Tissue For Child Head Protection
71.	Research On Creep Characteristics Of FRP Directional Device In Long-term Storage
72.	Modeling of geometry effects in fretting fatigue
73.	Research On Performance And Wear Simulation Of Automatic Tensioner Of Engine Accessory Drive System
74.	Study On Constitutive Models Of Steel Fiber Reinforced Concrete With Two-graded Aggregate Under Uniaxial Compression And Tension
75.	Structural Stability Analysis Of High Concrete Faced Rockfill Dam Under The Effect Of Rockfill Rheology
76.	Research On Mechanical Properties Of Cold-formed Thin-wall Steel-Glulam Composite Beams
77.	Numerical Simulation Of Reinforced Concrete Beam Based On Damage Equivalent Elasticity
78.	Numerical Simulation Of Dynamic Behavior Of Microcapsule Based Self-Healing Cementitious Composites Under Impact Loading
79.	Research And Verification Of Structural Steel Micro-fracture Model SWDM-Pro Considering The Influence Of Loading History
80.	Research On Contact And Wear Characteristics Of Aviation Spline
<<First <Prev Next> Last>> Jump to