Stiffness ratio - Globe Thesis

Keyword [Stiffness ratio] Result: 161 - 178 \| Page: 9 of 9
161.	Seismic Performance Analysis Of Precast Concrete Frame With Braces
162.	Analysis Of The Effect Of Steel-FRP Composite Bar On The Progressive Collapse Resistance Of Frame Structures
163.	Study On The Effect Of Stiffness Ratio On The Seismic Performance Of Structure Supported By Foundations With Different Elevations
164.	Test On Seismic Performance Of Step-terrace Frame Structures With Sliding Support Connection In The Upper Ground
165.	Effects Of Different Transfer Floor Positions And The Setup Of Short-leg Shear Wall On The Seismic Performance Of Frame-supported Short-leg Shear Wall With The Axillary Beam Type Transfer Structure
166.	Pseudo-Static Test And Seismic Performance Of Stilted RC Frame Structure Under The Influence Of Story Stiffness Ratio
167.	Seismic Performance Analysis And Optimized Design Of Primary-secondary Hybrid Structure With Buckling-restrained Braces
168.	Study On Lateral Resistance Mechanism Of Mega-Braced Frame-Core Tube Buildings
169.	Analysis Of Seismic Behaviors Of Story Isolated Muliti-tower Structures With Large Base
170.	Experimental Studies And Theoretical Analysis Of Steel Frame With Buckling-Restrained Steel Plate Shear Wall Using Grid Multi-Ribs
171.	Study On Failure Modes Of RC Frame Structures Based On Stiffness And Strength Matched
172.	Study On The Damping Effect Of Seismic Isolation Based On Nominal Stiffness Ratio
173.	Nonlinear Analysis Of Seismic Behavior Of Steel Seinforced Secycled Soncrete Column Steel Beam Composite Frame With Buckling-Restrained Braces
174.	Research On The Layer Stiffness Ratio And Simplified Calculation Method Of Inter-story Isolated Structures
175.	Research On The Mechanism Of Bending And Torsion Of Composite Girders With Corrugated Steel Webs
176.	Research On Side-mid Span Ratio And Ultimate Span Of Through Type Continuous Beam Arch Composite Bridge With Single Arch Rib
177.	Dynamic And Static Stiffness Analysis Of Full-scale Prefabricated Prestressed Concrete Girder
178.	Research On The Design Method Of Underpinning Structure For Jacking And Rectification Based On Stiffness
<<First <Prev Next> Last>> Jump to