Specimens - Globe Thesis

Keyword [Specimens] Result: 121 - 140 \| Page: 7 of 10
121.	Development of a new ring shear apparatus for investigating the critical state of sands
122.	Effect of one and two stiffeners on residual stresses of ship hull
123.	Two-parameter fracture mechanics analysis of mixed-mode specimens under static and fatigue loading
124.	A Comparison of the Bond Strength of Spun and Static Cast Concrete Specimens
125.	Experimental and analytical evaluation of conventionally reinforced deck-girder bridge bent caps with vintage details
126.	Bender elements and bending disks for measurement of shear and compressional wave velocities in large sand specimens
127.	Environmental and Reinforcement Effects on Concrete Expansion Undergoing Accelerated Alkali-Silica Reactio
128.	Influence de la temperature de compactage des plaques d'enrobes sur la resistance a l'ornierage
129.	Shear behaviour of disturbed regions in reinforced concrete beams with corrosion damaged shear reinforcement
130.	The effects of bio content and type of resin on FRP wet layup tensile and bond strength to concrete and durability under freeze-thaw cycle
131.	Characterization of damage in mortar and concrete specimens due to delayed ettringite formation (DEF)
132.	An evaluation of the effects of various design parameters on the air voids of asphalt concrete specimens
133.	Quantifying anisotropy in asphalt concrete pavements using an ultrasonic method
134.	Dynamic and cyclic properties in shear of tuff specimens from Yucca Mountain, Nevada
135.	Interpretation of soil behavior from laboratory specimens subjected to non-uniform loading conditions
136.	The effect of dents on fatigue life and fatigue crack growth of aluminum 2024-T3 bare sheet
137.	A constituitive model for fiber-reinforced soils
138.	High performance steel bridge girders: Performance and design
139.	Experimental investigations on small-strain stiffness properties of partially saturated soils via resonant column and bender element testing
140.	Punching and flexural strength of flat plates
<<First <Prev Next> Last>> Jump to